| S.No |
Name |
| 1 |
ADVANCE DESIGN AND ANALYSIS OF THE TAILWING OF A TRANSPORT AIRCRAFT |
| 2 |
OPTIMIZATION OF AIRCRAFT WING WITH COMPOSITE MATERIAL |
| 3 |
DESIGN AND ANALYSIS OF FLOW OVER A SUPERSONIC DIFFUSER INTAKE |
| 4 |
MODELLING AND CONSIDERED FOR ROCKET BODY |
| 5 |
DESIGN OF WING ROTOR |
| 6 |
DESIGN OF DELTA WING PAYLOADS OF LIGHT COMBAT AIRCRAFT |
| 7 |
DESIGN AND FLOW ANALYSIS OF M WING |
| 8 |
Design And Analysis Of Windmill Blades |
| 9 |
DESIGN AERODYNAMIC OF MORPHING BLADEFOR HORIZONTAL AXIS WIND TURBINE |
| 10 |
Flow Visualization Studies on a Delta Wing At High Angle Of Incidence |
| 11 |
Design of Supersonic Cruising Passenger Aircraft |
| 12 |
Analysis of Flow through High by Pass Ratio Turbo Fan Engine |
| 13 |
Vibration Analysis of Turbine Blades |
| 14 |
Design of an Supersonic Air Intake |
| 15 |
Design of a Wind Tunnel Nozzle with a Area Ratio Of 2636 |
| 16 |
Calculation of Specific Heat inside a Combustion Chamber |
| 17 |
Theoretical Generation of V-N Diagram of A Combat Aircraft |
| 18 |
Elementary Calculations of Aircraft Power Plants |
| 19 |
Design of a High Endurance Walk along Glider |
| 20 |
Hoop Stress Analysis of Boilers |
| 21 |
Design of an Aircraft as a Free Beam |
| 22 |
Experimental Investigation of a Free Falling Body |
| 23 |
Design of Axial Flow Compressor |
| 24 |
Control Volume Analysis of Flow over an Aerofoil |
| 25 |
Design of a Table Top Wind Tunnel |
| 26 |
NOISE REDUCTION IN COMMERCIAL AIRCRAFTS BY MODELING OF FUSELAGE STRUCTURE |
| 27 |
DESIGN OF A HIGH ENDURANCE WALKA LONG GLIDER |
| 28 |
Design and Structural Analysis of an Aircraft Wing (NACA 4412) by Using Aluminium LM25 (AL) and Silicon Carbide (SiC) |
| 29 |
REDUCTION OF AIRCRAFT ENGINE NOISE BY COVERING SURFACE ACOUSTIC METAMATERIALS ON SIDEWALLS |
| 30 |
Thermo-Structural Analysis Of Compressor Casing In Jet Engine At Operating Condition |
| 31 |
Transient Dynamic Analysis Of Composite Wing Structures For High Speed Impact |
| 32 |
Fatigue Analysis For An Aircraft Turbine Blade For Severe Alternating Load Conditions |
| 33 |
Thermal And Impact Load Analysis Over An Re Entry Vehicle |
| 34 |
Static And Dynamic Analysis For A Turbo Propeller Engine And Its Optimization |
| 35 |
Vibrational Analysis Of A Wing During Curise Speed |
| 36 |
Stress Analysis Over A Compressor Due To External Bird Hit |
| 37 |
Structural Analysis of Aircraft Landing Gear During Rough Landing |
| 38 |
Optimization In Fuselage Design For Stresses Caused Due To Wing At Various Load Conditions |
| 39 |
Optimization In Piston Design For High Speed Piston Used In Reciprocation Engines |
| 40 |
Thermal And Structural Analysis For Turbine Engine Blades At Maximum Temperature |
| 41 |
Estimation Of Heat Transfer Performace In A Combustion Chamber |
| 42 |
Study Of An Aerodynamic Behaviour Of A Car For Various Different Retro Fittings |
| 43 |
Combustion Chamber Design Study Analysis Using Cfd For Operation Conditions |
| 44 |
Design And Optimization Of A Wing Using Smart Materials |
| 45 |
Nozzle Design Optimization For To Reduce Noise For Turbo Jet Engine |
| 46 |
Air And Fuel Flow Interaction In Combustion Chamber For Various Injector Locations |
| 47 |
Reduction Of Nox In Catalytic Converter |
| 48 |
Design And Optimization In Automotive Cabin Cooling |
| 49 |
Advanced Design For A Tail Wing For Better Performance |
| 50 |
Design And Anlaysis Of Dust Collector Using Cfd |
| 51 |
Design And Optimization Of Flow Field In Heat Exchanger |
| 52 |
Reduction Of Drag In A Buggy Car Model |
| 53 |
Optimization In Wing Design For Fighter And Passenger Aircraft |
| 54 |
Compressor Design Optimization For A High Speed Jet Engine |
| 55 |
Internal Flow Analysis In A Jet Engine For Various Aoa Of An Aircraft |
| 56 |
Optimization In Micro-Aerial Vehicle Design For Higher Performance |
| 57 |
Design And Finite Element Analysis Of Aircraft Wing Using Ribs And Spars |
| 58 |
Design And Stress Analysis Of Wing Structure For A Military Transport Aircraft - Cessna Citation V (560) |
| 59 |
A Cfd Analysis Of A Wind Turbine Blade Design At Various Angle Of Attack And Low Reynolds Number |
| 60 |
Aerodynamic Analysis Of Horizontal Axis Wind Turbine Blade |
| 61 |
Design And Analysis Of Naca4420 Wind Turbine Aerofoil Using Cfd |
| 62 |
Design And Analysis Of Airfoil Using Simulation Techniques |
| 63 |
Design Of Naca63215 Airfoil For A Wind Turbine |
| 64 |
Cfd Analysis Of An Aerofoil |
| 65 |
Analysis, Design, And Testing Of Airfoils For Use At Ultra- Low Reynolds Numbers |
| 66 |
Airfoil For Application In Wind Turbine Blade: A Review |
| 67 |
Minimum Weight Wing Design And Analysis |
| 68 |
Design And Analysis Of Rocket Nozzle |
040 - 42221425 / 9966884929 / 7386823813
9966884929
nationalinstitutenip@gmail.com
